Latest developments
Attention should be paid to the processing of stainless steel plates during operation
Release time:
2024/08/29
At a unit size, the thicker the stainless steel plate, the greater the required
1. At a unit size, the thicker the stainless steel plate, the greater the required bending force, and as the plate thickness increases, the margin of bending force should be larger when selecting bending equipment;
2. At a unit size, the higher the tensile strength, the lower the elongation, the greater the required bending force, and the larger the bending angle should be;
3. In the design drawing, when the plate thickness corresponds to the bending radius, according to experience, the unfolded size of a bent workpiece is the sum of the right angle edges minus two plate thicknesses, which can fully meet the design accuracy requirements. Calculating the unfolded amount according to empirical formulas can simplify the calculation process and greatly improve production efficiency;
4. The higher the yield strength of the material, the greater the elastic recovery. In order to obtain a 90 degree angle for the bent part, the angle of the pressing tool needs to be designed to be smaller. Compared to carbon steel, stainless steel with the same plate thickness has a larger bending angle, which should be paid special attention to. Otherwise, bending cracks may occur, affecting the strength of the workpiece.
keywords
Related dynamics
Shiwei Industry & Trade Group
Product Service Hotline:
Address:
East First Garden, Rongli Street, Qingzhou Economic Development Zone, Shandong Province
Copyright©Shiwei Industry & Trade Group Co., Ltd